Light Bulb Replacement; Headlight/Position Light - Suzuki GSF1250 Owner's Manual

LIGHT BULB REPLACEMENT
The wattage rating of each bulb is
shown on the table below. When
replacing a burned out bulb, always
use the exact same wattage rating.
Using other than the specified rating
can result in overloading the electrical
system or premature failure of a bulb.
CAUTION
Using a light bulb with the wrong
wattage rating can cause electri-
cal system damage or shorten
bulb life.
Always use the specified light
bulb.
Headlight
12V 60/55W (H4)
... GSF1250
12V 55W (H7)
x
2
... GSF1250S
Turn signal light
12V 21W
Brake light/Taillight
12V 21/5W
Position light
12V5W
License plate light
12V5W
HEADLIGHT/POSITON LIGHT
To replace the headlight bulb and
position light bulb, perform the follow-
ing step:
GSF1250
Headlight
1.
Remove the two screws
G)
from
the headlight outer ring .
2. Disconnect the socket ~ and
remove the rubber cap @.
Position light
6-38
3. Unhook the bulb holder spring @,
and pull out the bulb @.
1. Pull out the socket.
2. Pull off the bulb from the socket.
CAUTION
Oil from your skin may damage
the headlight bulb or shorten its
life.
Grasp the new bulb with a clean
cloth.
6-39