Parameter Specifications In Alarm Texts - Siemens SINUMERIK 840D sl Commissioning Manual

Configuring alarms
14.2 Creating alarm texts via alarm text files
Source ID
7
8
9
10
See also
Insert alarm colors (Page 136)
14.2.6

Parameter specifications in alarm texts

Alarm texts can contain alarm parameters (accompanying values) that specify the cause of
an alarm in more detail. These parameters are usually numerical values that are transmitted
from an alarm source when the alarm is signaled along with the other alarm data.
How the parameters are incorporated into the alarm text is specified via placeholders
(parameter specifications) in the language-specific alarm texts, e.g. "Channel %1 Axis %2 in
machine data %3 defined for several channels".
On occurrence of an alarm, the text is replaced by the corresponding parameters, e.g.:
"Channel 5 Axis A3 in machine data 4711 defined for several channels".
Standard parameter specifications
The following table shows the standard parameter specifications:
Table 14-1
Parameter
specifier
%1
%2
%3
%4
%5
%6
%7
122
Source URL
/NCK/Channel#7/Partprogram
/NCK/Channel#8/Partprogram
/NCK/Channel#9/Partprogram
/NCK/Channel#10/Partprogram
Standard parameter specifications
Description
First parameter from the alarm data of the alarm source
Second parameter from the alarm data of the alarm source
Third parameter from the alarm data of the alarm source
Fourth parameter from the alarm data of the alarm source
Fifth parameter from the alarm data of the alarm source
Only for NCK alarms
First part (up to the separator) of the fourth parameter from the alarm data of the
alarm source
Sixth parameter from the alarm data of the alarm source
Only for NCK alarms
Second part (between the first and second separator) of the fourth parameter from
the alarm data of the alarm source
Seventh parameter from the alarm data of the alarm source
Only for NCK alarms
Third part (between the second and third separator) of the fourth parameter from the
alarm data of the alarm source
Commissioning Manual, 01/2008, 6FC5397-1DP10-3BA0
HMI sl (IM9)