Sample Destination Data (To); Pattern Source Data (From) - Yamaha EX5 Owner's Manual

Sample destination data (To)

The destination that can be selected will differ
depending on the setting designated in "From."
Settings:
Source data (From):
All Data
0001~1024
The samples of WAV, AIFF and AKAI file types can be
loaded. As to the WAV and AIFF files, you can select "1
file" or "all files" as the source. When "1 file" is selected,
the currently displayed file will be loaded. When "all files"
is selected, all the WAV (or AIFF) files in the designated
directory will be loaded.
As to the AKAI files, you can load its data via the floppy
disik drive and CD-ROM drive only.
[F5]: SMF (MIDI File)
Loads an ESEQ file with the extension ".ESQ" or a
MIDI file with the extension ".MID" from the disk into
the internal memory.
For more information on ESEQ file format, see File Type
on page 261.
Device name/directory (source)
The type of destination data
When a Standard MIDI file and ESEQ file co-exist on
the same disk, both files will be displayed in the same
screen.
Settings:
Device name/directory (source)
File number (source)
Direct Play function
With the SMF format 0 file, a file can be played
back without loading. Select a SMF format 0 file,
push [F6] and playback will start immediately. In
this case the data is not loaded into the internal
memory, it is merely read directly from the disk and
played back. This is particularly convenient for
auditioning songs quickly. For more information on
Direct Play, see File Type on page 261.
Destination (To):
All Data
Wave DRAM or FLASH (0001~1024)
File type and file number/name (source)
[F6]: SONG
Loads a song file from the disk into the internal
memory. Data such as Play Effects, Track Transmit
Channel and Controller data is included in a song file.
Device name/directory (destination)
The type of destination data
Settings:
Device name/directory (source)
File number (source)
[F7]: PTN (Pattern)
Loads a pattern file from the disk into the internal
memory. Data such as Play Effects, Track Transmit
Channel and Controller data is included in a pattern
file.
Device name/directory (source)
The type of destination data

Pattern source data (From)

(If necessary select the source data device,) move the
cursor to a file number, and select a source file for
the load operation. A pattern file (50 patterns) can
be loaded. Furthermore, one pattern can be
designated and loaded. In this case, only a specified
pattern number will be replaced with the newly
loaded data.
267
File type and file number/name (source)
File type and file number/name (source)
The type of source data