Normal+[Edit] An Element - Yamaha EX5 Owner's Manual

Music synthesizer / realtime control / extended synthesis / tone generator / realtime control / extended synthesis
Hide thumbs Also See for EX5:
Table of Contents

Advertisement

Normal Voice (AN Element)
Explanations below cover only the differences between
the AN Element and the AWM Elements. The
remaining functions and parameters are the same as for
the AWM Elements. For explanations, see the relevant
sections in this Owner's Manual.
VOICE

------Normal+[EDIT] AN Element

------[F1:COMMON]........................................................112
------[F6:Parameter] ..........................................112
------[F7:Arpeggio] ..................................................79
------[F3:Arpeggio-Edit]............................79
------[F8:Name] ........................................................79
------[F2:OSCILLATOR] ................................................113
------[F3:Algorithm] ..........................................113
------[F4:VCO] ....................................................114
------[F5:Modulation] ........................................116
------[F6:Wave] ....................................................116
------[F7:Mix] ............................................................81
------[F8:Zone]............................................................82
------[F3:PITCH] ..............................................................117
------[F6:Parameter] ................................................83
------[F7:Scaling] ......................................................83
------[F8:EG] ........................................................117
------[F4:FILTER] ............................................................118
------[F7:VCF]......................................................118
------[F8:EG] ........................................................119
------[F5:AMPLITUDE]..................................................119
------[F6:Parameter] ................................................96
------[F7:Mixing] ................................................119
------[F8:EG]........................................................120
------[F6:LFO] ..................................................................121
------[F8:LFO]......................................................121
------[F7:CONTROLLER] ..............................................123
------[F7:Pitch Control] ..........................................103
------[F8:Controller Set] ....................................123
------[F8:EFFECT]................................................................105
------[F4:Type] ........................................................105
------[F5:Insertion Effect 1] ..................................106
------[F6:Insertion Effect 2] ..................................106
------[F7:Reverb]......................................................107
------[F8:Chorus] ....................................................107
* The parameters in the above grayed menus are the same as
those found in the AWM Elements.
[F1]: COM (Common)
[F6]: PARAM (Parameters)
When an AN Element Voice Type, AN (Poly)+AWM,
AN (Layer)+AWM or AN+FDSP is selected from the
PARAM menu, the following parameters will be added
to the screen.
AN (Layer)+AWM and AN+FDSP Voice Types are not
available with the EX7.
When AN+FDSP Voice Type is selected, the function key
[F5] for the FDSP at the bottom of the screen will be added
and the FDSP parameters can be accessible. For more
information about the FDSP, see page 123.
When the AN (Poly)+AWM or AN+FDSP Voice Type is
selected, the first Element is fixed as an AN Element.
When the AN (Layer)+AWM is selected, the first and
second Elements are fixed as an AN Element. The
remaining Elements are for the AWM Elements. (Set in
the OSC WAVE screen.)
AN Mono/Poly (AN Monophonic/Polyphonic)
Selects how an AN Element produces sound. There
are two types, "mono" for monophonic and "poly"
for polyphonic. However, even if Poly mode is
selected for an AN Element, only one note is
produced with EX7 and two notes at maximum for
EX5/5R. Select the mode that best suits your playing
style.
Settings:
mono:
Only one note can be produced at a time. If two keys are
held simultaneously, a new note will be triggered when the
first key which currently produces sound is released.
poly:
With the EX7, only one sound can be produced at a time.
The EX5/5R in Poly mode can produce one or two sounds
depending on the selected Voice Type. In Poly mode, if two
or more keys are held simultaneously, when the first key
which currently produces sound is released, the other notes
will not be retriggered.
Voice Type
AN(Poly)
AN(Layer)
AN+FDSP
For the other three (or two) AWM Elements, how each
element produces sound is determined by the AWM
Mono/Poly parameter on page 79.
112
EX5/5R
EX7
2 notes
1 note
1 note
1 note

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ex5rEx7

Table of Contents