Copy Measure; Erase Measure; Get Phrase - Yamaha EX5 Owner's Manual

1. Copy Measure

This job copies all data from a specified range on an
arpeggio sequence track onto another. It is also possible
to copy data within the same track. This operation
overwrites any data already existing on the destination
track.
Src Trk (Source Track)
Sets the source track that will be copied.
Settings: 1~4, all
Src Meas (Source Measure)
Sets the range (the beginning measure and the end
measure) in the source track.
Settings: 01~16 (for the beginning measure and the end
measure)
Dst Trk (Destination Track)
Sets the destination track that will be copied to.
Settings: 1~4, all
Dst Meas (Destination Measure)
Sets the first destination measure (the measure
where copying will begin) that will be copied to.
Settings: 01~16
Times
Sets the number of times copy will take place.
Settings: 1~16

2. Erase Measure

This job erases all data from a specified range on a
track. Even though the data is erased the empty
measures still remain.
Track
Sets the track where Erase Measure will be executed.
Settings: 1~4, all
Measure
Sets the measure range (beginning measure to the
end measure) where Erase Measure is executed.
Settings: 01~16 (for the beginning measure and the end
measure)

3. Get Phrase

This job borrows sequence data from a song track onto
the currently selected arpeggio track. The job
overwrites any data already existing in the destination
track.
Src Song Track (Source Song Track)
Sets the source song sequence track.
Settings: 1~16
Measure
Sets the measure range (the beginning measure and
the end measure) for the phrase that will be taken
in.
Settings: 001~999 (for the beginning measure and the
end measure)
Dst Track (Destination Track)
Sets the destination track for the phrase that will be
taken in.
Settings: 1~4
253