[Append Pattern]; [Split Pattern] - Yamaha EX5 Owner's Manual

Src Track (source track)
Sets the Mix source track.
Settings: 1~8
Dst Track (Destination track)
Sets the Mix destination track.
Settings: 1~8
6. Append Pattern
This job lets you connect the data of two specific tracks
to complete a pattern. A source pattern (Append
source pattern) is connected to the end of a destination
pattern (Append destination pattern).
Src Ptn (Source Pattern)
Sets the Append source pattern number.
Settings: 1~50
SrcTrk (Source Track)
Sets the Append source pattern track that will be
copied to the destination pattern.
Settings: 1~8
Dst Ptn (Destination Pattern)
Sets the Append destination pattern number.
Settings: 1~50
Dst Track (Destination Track)
Sets the Append destination pattern track.
Settings: 1~8
7. Split Pattern
This job splits track data of a pattern (Split source
pattern) at a specified measure and moves the latter
half of the split track data to the beginning of the track
of another pattern (Split destination pattern). The
former half of the split track data remains in its
original location.
The job overwrites any data already existing in the
destination location.
Src Ptn (Source Pattern)
Sets the Split source pattern number.
Settings: 1~50
SrcTrack (Source Track)
Sets the Split source pattern track.
Settings: 1~8
Dst Ptn (Destination Pattern)
Sets the Split destination pattern number that will be
moved to.
Settings: 1~50
Dst Track (Destination Track)
Sets the Split destination pattern track that will be
moved to.
Settings: 1~8
Measure
Sets the measure number in the designated source
pattern track (this measure number marks the
beginning of the latter half data).
Settings: 1~16
230