Transpose; [Shift Note]; Crescendo; To Note - Yamaha EX5 Owner's Manual

Measure
Settings: 01~16 (for the beginning measure and the end
measure)
Rate
Settings: 000%~100%~200%
Offset
Settings: –99~+0~+99

5. Transpose

This job lets you transpose in semitones the notes in
the designated range of a specified pattern track.
For more information on functions and each parameter,
see page 217, Transpose in Song Job mode.
Track
Settings: 1~8
Measure
Settings: 01~16 (for the beginning measure and the end
measure)
Transpose
Settings: –99~+0~+99
6. Shift Note
This job replaces all occurrences of a specified pitch
(within the designated range of the specified pattern
track) with some other pitch.
For more information on functions and each parameter,
see page 217, Shift Note in Song Job mode.
Track
Settings: 1~8
Measure
Settings: 01~16 (for the beginning measure and the end
measure)
FromNote
Settings: C–2~G8

To Note

Settings: C–2~G8

7. Crescendo

This job gradually increases or decreases the volume of
the pattern. This job produces the crescendo
(increasing) or diminuendo (decreasing) effect by
applying a gradual change to the velocity of a
designated range of a specified track.
For more information on functions and each parameter,
see page 217, Crescendo in Song Job mode.
Track
Settings: 1~8
Measure
Settings: 01~16 (for the beginning measure and the end
measure)
Range
Settings: –99~+0~+99
236