Establishing A Connection Via Usb - Siemens SITOP UPS1600 Manual

3.5.7

Establishing a connection via USB

1. Connect the SITOP UPS1600 using a USB cable with the client (PC/PG).
2. Select "General settings > Device configuration".
3. Activate the "USB (UPS1600)" checkbox.
4. If, in the lower area, a blue bar with the message "Configuration changed, restart
application now." appears, click on the bar to restart the UPS. Clicking on "x" only
minimizes the UPS Manager. You can maximize the UPS Manager again by clicking on
the associated symbol in the task bar.
The SITOP UPS Manager is restarted.
5. Check that the connection lamps light green.
The connection lamps light green, the connection to the SITOP UPS1600 via USB has
been established, if the (local) PC is connected as master PC to the SITOP UPS1600.
SITOP UPS1600 / UPS1100
Manual, 04.2016, A5E37775406-6-76
Engineering and remote access
3.5 SITOP UPS Manager
99