Mounting/removing
5.1 SITOP UPS1600
5.1.1
Signal connector
Mounting
Push connector on socket
Removal
To remove the signal connector, press the release lever (4b) (see Image 5-2
Mounting/removal: Signal connector (Page 140)) and then remove the connector.
Image 5-2
5.1.2
USB connector
For deployment in an explosion-endangered environment, a USB connector with strain relief
must be used.
Mounting
Push the connector onto the socket in the housing until the strain relief (6b) snaps into the
housing (6a).
Removal
To remove the USB connector, press to release the strain relief (6b) (see Image 5-3
Mounting/removal: USB connector (Page 140)) and then remove the connector.
Image 5-3
140
④
in the housing.
Mounting/removal: Signal connector
Mounting/removal: USB connector
SITOP UPS1600 / UPS1100
Manual, 04.2016, A5E37775406-6-76