Web Server; Accessing The Web Server - Siemens SITOP UPS1600 Manual

3.6

Web server

The web server is used to monitor the SITOP UPS1600. It operates independently of
UPS Manager and PROFINET access. It is not possible to write access the
SITOP UPS1600.
New functions of the web server from V2.1 and higher:
● Write access
● User management
● Access via https
3.6.1

Accessing the web server

A Web browser is used for the access and operation.
The following Web browsers are suitable:
● Internet Explorer V8 (on MS Windows XP)
● Internet Explorer V10 (on MS Windows 7)
● Internet Explorer V11 (on MS Windows 7)
● Mozilla Firefox V40 (on MS Windows 7)
● Google Chrome V44 (on MS Windows 7)
Preconditions
● The computer with installed web browser is connected with the SITOP UPS1600 via
Ethernet.
● The Web browser can display SVG graphics. From version V2.1 and higher, it is no
longer necessary that SVG graphics are supported.
If your web browser cannot display SVG graphics, then "Please install the SVG viewer for
a correct display" message appears on the start screen. To permit the correct display,
perform the following steps:
– Download the SVG update at (http://www.savarese.com/software/svgplugin).
– Install the SVG update.
– If required, restart your computer.
● The SITOP UPS1600 has an IP address that you know.
● Web server access is activated.
The following sections explain how to activate access to the web server:
– For SIMATIC STEP 7 in the TIA Portal at Parameterizing the UPS1600 (Page 51).
– For SIMATIC STEP 7 at Parameter assignment (Page 70).
SITOP UPS1600 / UPS1100
Manual, 04.2016, A5E37775406-6-76
Engineering and remote access
3.6 Web server
113