Boot - Gigabyte GA-PICO3455 User Manual

2-5

Boot

Main Advanced
Boot Configuration
Setup Prompt Timeout
Bootup NumLock State
Full Screen LOGO Show
Boot Option Priorities
Fast Boot
Driver Option Priorities
New Boot Option Policy
& Setup Prompt Timeout
Allows you to configure the number of seconds to stay in BIOS setup prompt screen. (Default: 1)
& Bootup NumLock State
Enables or disables Numlock feature on the numeric keypad of the keyboard after the POST. (Default: On)
& Full Screen LOGO Show
Allows you to determine whether to display the GIGABYTE Logo at system startup. Disabled skips the
GIGABYTE Logo when the system starts up. (Default: Enabled)
& Boot Option Priorities #1/2
Specifies the overall boot order from the available devices.
Removable storage devices that support GPT format will be prefixed with "UEFI:" string on the boot device
list. To boot from an operating system that supports GPT partitioning, select the device prefixed with "UEFI:"
string.
Or if you want to install an operating system that supports GPT partitioning such as Windows 10 64-bit,
select the optical drive that contains the Windows 10 64-bit installation disk and is prefixed with "UEFI:"
string.
& Fast Boot
Enables or disables Fast Boot to shorten the OS boot process. (Default: Disabled)
& SATA Support
All Sata Devices All SATA devices are functional in the operating system and during the POST.
(Default)
Last Boot HDD Only Except for the previous boot drive, all SATA devices are disabled before the OS
boot process completes.
This item is configurable only when Fast Boot is set to Enable.
& VGA Support
Allows you to select which type of operating system to boot.
Enables legacy option ROM only.
Auto
EFI Driver Enables EFI option ROM. (Default)
This item is configurable only when Fast Boot is set to Enable.
Aptio Setup Utility - Copyright (C) 2020 American Megatrends, Inc.
Security Boot Save & Exit
1
[On]
[Enabled]
[Disable]
[Default]
Version 2.18.1263. Copyright (C) 2020 American Megatrends, Inc.
- 23 -
gf: Select Screen
hi: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit