Gigabyte GA-PICO3455 User Manual page 19

Hide thumbs Also See for GA-PICO3455:
Table of Contents

Advertisement

& Ipv6 PXE Support
Enables or disables IPv6 PXE Support. This item is configurable only when Network Stack is enabled.
& Ipv6 HTTP Support
Enables or disables HTTP boot support for IPv6. This item is configurable only when Network Stack is
enabled.
& PXE boot wait time
Allows you to configure how long to wait before you can press <Esc> to abort the PXE boot. This item is
configurable only when Network Stack is enabled. (Default: 0)
& Media detect count
Allows you to set the number of times to check the presence of media. This item is configurable only when
Network Stack is enabled. (Default: 1)
` CSM Configuration
& CSM Support
Enables or disables UEFI CSM (Compatibility Support Module) to support a legacy PC boot process.
Enables UEFI CSM. (Default)
Enabled
Disables UEFI CSM and supports UEFI BIOS boot process only.
Disabled
& Network
Allows you to select whether to enable the UEFI or legacy option ROM for the LAN controller.
Do not launch Disables option ROM.
Enables UEFI option ROM only. (Default)
UEFI
Enables legacy option ROM only.
Legacy
This item is configurable only when CSM Support is set to Enabled.
& Storage
Allows you to select whether to enable the UEFI or legacy option ROM for the storage device controller.
Do not launch Disables option ROM.
Enables UEFI option ROM only. (Default)
UEFI
Enables legacy option ROM only.
Legacy
This item is configurable only when CSM Support is set to Enabled.
& Video
Allows you to select whether to enable the UEFI or legacy option ROM for the graphics controller.
Do not launch Disables option ROM.
Enables UEFI option ROM only. (Default)
UEFI
Enables legacy option ROM only.
Legacy
This item is configurable only when CSM Support is set to Enabled.
& Other PCI devices
Allows you to select whether to enable the UEFI or Legacy option ROM for the PCI device controller other
than the LAN, storage device, and graphics controllers.
Do not launch Disables option ROM.
Enables UEFI option ROM only. (Default)
UEFI
Enables legacy option ROM only.
Legacy
This item is configurable only when CSM Support is set to Enabled.
- 19 -

Advertisement

Table of Contents
loading

Table of Contents