Fast Boot - Gigabyte Z690 Series Manual

2-2

Fast Boot

Through the simple GIGABYTE Fast Boot interface, you can enable or change the Fast Boot or Next Boot
After AC Power Loss setting right in the operating system.
The Fast Boot Interface
Using Fast Boot
• BIOS Fast Boot:
This option is the same as the Fast Boot option
fast boot function to shorten OS boot time.
• Next Boot After AC Power Loss:
This option is the same as the Next Boot After AC Power Loss option
select the system bootup mode upon the return of an AC power loss. (This mode is configurable only when
BIOS Fast Boot is set to Enabled or Ultra Fast.)
After you configure the settings, click Save to save and click Exit. The settings will take effect on next boot. If
you click the Enter BIOS Setup Now button, the system will restart and enter BIOS Setup immediately.
(Note) For more details about this function, refer to Chapter 2, "BIOS Setup."
in BIOS Setup. It allows you to enable or disable the
(Note)
in BIOS Setup. It allows you to
(Note)
- 10 -