Table of Contents
Advertisement
S
1) SATA3 0 (SATA 6Gb/s Connector)
The SATA connector conforms to SATA 6Gb/s standard and are compatible with SATA 3Gb/s and SATA 1.5Gb/s
standard. Each SATA connector supports a single SATA device.
B S S
S
S F
_
_
_
S
_S
2) SATA_PWR (SATA Power Connector)
The connector provides power to the installed SATA device.
3) BAT (Battery/Battery Cable Header)
The battery provides power to keep the values (such as BIOS configurations, date, and time information)
in the CMOS when the computer is turned off. Replace the battery when the battery voltage drops to a
low level, or the CMOS values may not be accurate or may be lost.
USB 0_ B
U
_ _
3
Pin No. Definition
1
7
Pin No. Definition
1
_
You may clear the CMOS values by removing the battery cable:
1. Turn off your computer and unplug the power cord.
2. Unplug the battery cable from the battery cable header and wait for one minute.
3. Plug in the battery cable.
4. Plug in the power cord and restart your computer.
Pin No. Definition
1 (+)
2 (-)
F_USB3
B_
• Always turn off your computer and unplug the power cord before replacing the battery.
• Replace the battery with an equivalent one. Danger of explosion if the battery is replaced with
an incorrect model.
• Contact the place of purchase or local dealer if you are not able to replace the battery by yourself
or uncertain about the battery model.
• Used batteries must be handled in accordance with local environmental regulations.
B
_ S
S_
_
B
_ U
_
B
1
GND
2
TXP
F_USB3 F
3
TXN
4
GND
5
RXN
6
RXP
7
GND
_
_
_B
1
GND
2
VCC
3
+12V
4
GND
S F_
S S_F
B
1(+)
RTC Power
2 (-)
GND
F_USB30 3
- 10 -
S _
F
_ 0
_ F
_ 0
F
_3
U
Advertisement
Table of Contents
