Security - Gigabyte GA-PICO3455 User Manual

2-4

Security

Advanced
Main
Password Description
If ONLY the Administrator's password is set,
then this only limits access to Setup and is
only asked for when entering Setup.
If ONLY the User's password is set, then this
is a power on password and must be entered to
boot or enter Setup. In Setup the User will
have Administrator rights.
The password length must be
in the following range:
Minimum length
Maximum length
Setup Administrator Password
User Password
` Secure Boot
& Setup Administrator Password
Allows you to configure an administrator password. Press <Enter> on this item, type the password, and
then press <Enter>. You will be requested to confirm the password. Type the password again and press
<Enter>. You must enter the administrator password (or user password) at system startup and when entering
BIOS Setup. Differing from the user password, the administrator password allows you to make changes to
all BIOS settings.
& User Password
Allows you to configure a user password. Press <Enter> on this item, type the password, and then press
<Enter>. You will be requested to confirm the password. Type the password again and press <Enter>.
You must enter the administrator password (or user password) at system startup and when entering BIOS
Setup. However, the user password only allows you to make changes to certain BIOS settings but not all.
To cancel the password, press <Enter> on the password item and when requested for the password, enter
the correct one first. When prompted for a new password, press <Enter> without entering any password.
Press <Enter> again when prompted to confirm.
NOTE: Before setting the User Password, be sure to set the Administrator Password first.
& HDD Security Configuration
Displays a list of connected hard drives and allows you to set a password for a specific hard drive. This
item appears only when a hard drive is installed.
` Secure Boot
& System Mode
Displays the current system mode.
& Secure Boot
Displays the current secure boot state.
& Vendor Keys
Displays the vendor keys.
Aptio Setup Utility - Copyright (C) 2020 American Megatrends, Inc.
Security Boot Save & Exit
3
20
Version 2.18.1263. Copyright (C) 2020 American Megatrends, Inc.
- 21 -
gf: Select Screen
hi: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit