Loading Trays; Loading The Standard Paper/Transparency Tray - Xerox Phaser 860 User Manual

Loading Trays

For a list of the recommended paper, transparencies, and labels that
can be used in each type of tray, refer to page 14.

Loading the Standard Paper/Transparency Tray

You can also refer to the labels inside the tray for loading instructions.
1.
Pull out the tray.
2. Load the print media.
One-sided job — Load paper with the side to be printed face
I
up. Load letterhead paper face up with the letterhead toward
the front of the tray. Load transparencies with the side to be
printed face up and the notch in the back-right corner of the
tray.
Two-sided job — Load paper with the side to be printed first
I
face down. Place letterhead paper face down with the
letterhead toward the back of the tray. For more information
on two-sided printing, refer to page 39.
Note
Make sure that you place the paper or transparencies under
the tabs in the back of the tray.
User Guide
0726-54
17