Printing On Special Media; Printing On Phaser High-Resolution Photo Paper - Xerox Phaser 860 User Manual

Printing on Special Media

In addition to bond paper, the printer can print on the following
special media:
Phaser High-Resolution Photo Paper
I
Phaser Labels and Phaser Business Cards — see page 30
I
Phaser 860 Transparencies — see page 32
I
Envelopes — see page 34
I
Letterhead paper — see page 38
I

Printing on Phaser High-Resolution Photo Paper

The Phaser High-Resolution Photo Paper can be printed on one side
only, since it has a Xerox logo on the reverse side. Refer to page 5 for
more information.
1. You can either:
Place up to 50 sheets of the photo paper face up in the
I
standard paper/transparency tray. Make sure that the tray
switch is set to Paper (forward position).
Choose to manually feed the paper. Don't place the photo
I
paper in the manual-feed slot until you are prompted by the
printer's front panel to do so.
2. In the printer driver:
Select the tray containing the high-resolution photo paper
I
(Upper Tray) or Manual Feed-Paper.
Select one-sided printing.
I
Select High-Resolution/Photo for the Print Quality mode.
I
3. Send the job to the printer.
4. If you selected Manual Feed-Paper, wait until the printer's front
panel prompts you, then insert the first sheet face down in the
manual-feed slot. Wait until you are prompted again before
adding the next sheet.
User Guide
29