Checking For The Loss Of Power - Xerox 8825/8830 Operator's Manual

PROBLEM SOLVING
Checking for Loss of Power
If there is a loss of power to the printer, go to the right side of the printer and
locate the point where the power cord goes into the printer. Next to the power
cord is a Ground Fault Protector, as shown in the illustration. Ensure that the
power cord is plugged into the wall outlet and follow the instructions on the
label (A).
If power is not restored after you have followed the instructions, call for
service.
A
XES Synergix 8825/8830 Printer Operator Manual 31