Loss Of Power; Specifications - Xerox 700 User Manual

Accessories

Loss of power

Specifications

10-12
If power is interrupted to the HCS:
Paper guidelines
Electrical
100V to 240V
Temperature and humidity
10 to 32°C, 15 to 85RH
50 to 90°F, 15 to 85RH
NOTE: Above 82°F (28°C), reduced humidity is
required to maintain the specified performance.
• Ensure the power cord is plugged in to the
proper wall receptacle
• Ensure that the machine power is switched
"On"
• Ensure that the Ground Fault Indicator is in
the "On" position
• If the power has not been restored by
checking the above items, then call for
service
• Stacker Tray will accept 64-280 g/m2 (either
coated or uncoated stock) with the possibility
of degraded stock quality and increased jam
rate
• Transparencies may be run to either the Top
Tray or the Stack Tray. Stack height should
be limited to 100 transparencies.
• Coated paper lighter than 100 g/m2 may not
run as reliably as coated paper heavier than
100 g/m2.
• Non-standard papers longer than 305 mm
(12") in the feed direction require 210 mm
(8.3") minimum measurement across the
feed direction.
• Non-standard papers shorter than 254 mm
(10") in the cross-feed direction require 330
mm (13") minimum measurement in the feed
direction.
Xerox 700 Digital Color Press User Guide