SYSTEM CONTROL TASKS
System version
System Version task through windows
System Version task through
Attention Light/Alarm
Attention Light/Alarm task
through windows
4-10
Use this task to display the system version number, the disk ID,
the PC UI version number, and the current logon level.
1. Select "System Version" from the System Control menu to
open the System Version window.
Figure 4-10.
2. Select the Close button to close the window.
command line
Enter the following command:
OCS
Note: The PC UI and Dialog versions do not appear when you
enter this command.
Use this task to enable or disable the Attention light and/or
alarm.
The Attention light can be enabled or disabled for either or both
modes—steady and flashing. If, for example, you disable the
steady mode of the Attention light, but leave the flashing mode
enabled, the Attention light does not go on when a condition
such as low dry ink occurs (and the corresponding Hint icons do
not appear on the PC UI or the printer control console), but the
Attention light still flashes when the printer stops due to a fault
(and the corresponding Fault icons still appear on the PC UI and
the printer control console).
1. Select "Attention Light/Alarm" from the System Control menu
to open the Attention Light/Alarm window.
System Version window
XEROX 4635 LASER PRINTING SYSTEM OPERATOR GUIDE