Optional Printer Components; Feeder/Stacker; Bypass Transport Module; Input Enablement Device - Xerox 4635 Operator's Manual

SYSTEM OVERVIEW OF THE 4635 LASER PRINTING SYSTEM

Optional printer components

1-16

Feeder/stacker

The 4635 has an inverter feeder stacker, and up to three optional
feeder stackers. Refer to the section "Printer components"
earlier in this chapter for information on the feeder stacker.

Bypass Transport Module

The Bypass Transport Module moves paper from the stacker to a
third party finishing device (for example, a stitcher). When
installed, the Bypass Transport Module is attached to the last
feeder/stacker module.
Figure 1-15. Bypass Transport Module and input enablement
device
1 Bypass transport paper output location
2 Input enablement device paper input location

Input enablement device

The input enablement device allows your 4635 to support and
interface directly with feeders. As shown in figure 1-15, it is
located on the right side of the last feeder/stacker.

7 X 10 enablement kit

The 7 X 10 input enablement kit allows your 4635 to print on 7
by 10 inch/178 by 254 mm paper size, with throughput speed of
up to 154 pages per minute.
XEROX 4635 LASER PRINTING SYSTEM OPERATOR GUIDE