OFFLINE PRINTING TASKS
Power off the open-reel tape drive
7-12
9. Gently depress the Hub Release lever, again, and turn the
hub counterclockwise until the clamp pads are fully retracted.
Figure 7-20.
Turning the hub
10. Close the tape path cover and secure the turnbuckles by
turning them clockwise.
11. Close the cover of the peripheral cabinet.
To power off the open-reel tape drive, press the Power switch to
the OFF position by pressing down on the side marked 0.
Figure 7-21.
Power switch
CAUTION: Unload the tape (or at least return it to BOT) before
powering off the tape drive.
XEROX 4635 LASER PRINTING SYSTEM OPERATOR GUIDE