Xerox 4635 Operator's Manual page 161

XEROX 4635 LASER PRINTING SYSTEM OPERATOR GUIDE
• Place the volume/serial number label on the side of the
cartridge opposite the file-protect selector and the customer
label on the top surface of the cartridge. Use the recessed
areas provided for them. When you want a new label on a
cartridge, remove the old one before you put on a new one.
Figure 7-37.
• Write on labels with markers that do not smear. Use only
labels that leave no residue when removed.
File protection A 1/2 inch cartridge tape has a thumbwheel on the side of the
cartridge that allows you to protect or write on a tape. When
the white dot is showing in the window, the cartridge is
protected and you can perform only read functions. When the
white dot is not showing, you can both read and write on that
tape. Figure 7-38 illustrates a 1/2 inch cartridge that is file
protected (white dot showing).
Figure 7-38.
1/2 inch cartridge tape
File-protected 1/2 inch cartridge
OFFLINE PRINTING TASKS
7-23