Removing The Bracket - Suzuki GSF1200SK6 Setup Manual

LEFT RIGHT
Before assembling the motorcycle, thoroughly
understand the "Safety Check Out" described on
page 32.
After completion of assembly, carefully check the
motorcycle referring to the "Safety Check Out",
then deliver the motorcycle to the customer.
ASSEMBLY

REMOVING THE BRACKET

Remove the bolts to take off the front brake and clutch
master cylinder from the bracket.
Keep the position of front brake and clutch
master cylinder with its cap facing upwards
until it is installed.
NOTE:
The bolts are no longer needed and these may
be discarded.
A: Front brake master cylinder
B: Clutch master cylinder
C: Bolt
D: Bracket
Remove the bracket from the handlebar mounting
position.
Be careful not to scratch the fuel tank.
NOTE:
The bracket and bolts are no longer needed
and these may be discarded.
A: Bracket
B: Bolt
5