FRONT BRAKE LEVER
Make sure the front brake lever position is correct.
The standard setting for this motorcycle is as indicated
in the table below.
A: Adjuster
CLUTCH LEVER
Make sure the clutch lever position is correct.
The standard setting of this motorcycle is as indicated
in the table below.
A: Adjuster
THROTTLE CABLE
This motorcycle has a twin throttle cable system.
Cable
ing.
Check the throttle cable play at the throttle grip.
2.0–4.0 mm
Throttle cable play: 2.0–4.0 mm
If adjustment is necessary, carry out the procedure
below:
1. Loosen the throttle cable adjuster lock nut
2. Turn the adjuster
3. Tighten the lock nut
22
Standard setting
Standard setting
A is for pulling cable and cable
D in or out until the correct play.
C while holding the adjuster
After the adjustment is completed, check that
handlebar movement does not raise the engine
idle speed and that the throttle grip returns
smoothly and automatically.
Position 3
Position 2
B is for return-
C.
D.