Before assembling the motorcycle, thoroughly
understand the "Safety Check Out" described on
page 27.
After completion of assembly, carefully check the
motorcycle referring to the "Safety Check Out",
then deliver the motorcycle to the customer.
ASSEMBLY
REMOVING THE BRACKET
Remove the bracket from the handlebar mounting
position.
Be careful not to scratch the fuel tank.
NOTE:
The removed bolt B and washer C are used to
tighten the steering stem.
The bracket and paper are no longer needed
and may be discarded.
A: Bracket
B: Bolt
C: Washer
D: Paper
Tighten the steering stem head bolt to the specified
torque.
Steering stem head bolt: 45 N·m (4.5 kgf-m)
A: Steering stem head bolt
B: Washer
5