Idle Speed Adjustment - Suzuki GSF1200SK6 Setup Manual

SAE
10W-40
Not recommended
SAE
10W-40
Recommended
27
Energy Conserving
Suzuki does not recommend the use of "ENERGY
CONSERVING" oils.
Some engine oils which is API SH or greater has
"ENERGY CONSERVING" indication in API classifica-
tion doughnut mark.
These oils can affect engine life and clutch perform-
ance.

IDLE SPEED ADJUSTMENT

After completing all of the servicing procedures, adjust
the engine idle speed by turning the throttle stop screw
knob.
NOTE:
The engine idle should be adjusted with engine
warmed up.
Engine idle speed:
1 100–1 300 r/min ... for Canada
1 200–1 400 r/min ... for the others
A: Throttle stop screw knob
(FOR LIMITED MARKET)
Set the meter to total, then push the SEL button for 2
seconds to switch the display.
Select km/h and mph properly to comply with traffic
regulations.
Check km/h and mph display after adjusting the instru-
ment panel display.
A: SEL button
B: Speedometer display (km/h, mph)
Test ride the motorcycle checking all mechanical func-
tions.
Tighten all nuts, bolts, and miscellaneous mounting
parts to the proper torque specs.
Confirm that all cables and wiring harnesses are con-
nected and routed correctly.