Cable Guide; Handlebar Balancer - Suzuki GSF1200SK6 Setup Manual

CABLE GUIDE

Pass the clutch hose, choke cable and left switch wir-
ing harness through the cable guide.
Install the cable guide to the front fork upper bracket.
A: Cable guide
B: 6 × 12 mm flange bolt
C: Clutch hose
D: Left switch wiring harness
E: Choke cable
F: Front fork upper bracket

HANDLEBAR BALANCER

(RIGHT AND LEFT)
Assemble the handlebar balancer parts as shown.
A: 6 × 105 mm screw
B: Balancer weight
C: Flange rubber cushion
D: Spacer L:50.0 mm
E: Washer OD:16.0 mm ID:6.5 mm T:4.0 mm
F: Rubber cushion
G: 6 mm spacer nut
With the screw not tightened, insert the balancer sub-
assembly into the handlebar end all the way, then
tighten the screw securely.
Check to ensure that the throttle operates
freely and closes automatically.
A: Balancer assembly
1. Lift the front of motorcycle by using a hoist.
2. Raise the rear of motorcycle.
3. Pull the crate base forward, then balance the
motorcycle.
11