Place the motorcycle on the side-stand, then remove
the hoist hook.
REMOVING THE BRACKET
Remove the bolt and bracket.
Remove the steel nut.
Be careful not to scratch the fuel tank.
NOTE:
The bracket, bolt and steel nut are no longer
needed and may be discarded.
A: Bracket
B: Bolt (with lock washer)
C: Steel nut
Confirm that the washer is placed on the steering stem
head.
Tighten the steering stem head nut to the specified
torque.
Steering stem head nut:
A: Washer
B: Steering stem head nut
7
90 N·m (9.0 kgf-m, 65.0 lb-ft)