Gbc Fusion Punch Ii With Offset Stacker - Xerox 100 User Manual

®
Xerox Nuvera 100/120/144 EA Digital Production System - Customer Expectations Document
GBC Fusion Punch II with
Offset Stacker
The GBC Fusion Punch ll provides inline printer
punching combining printing and punching into one
step. Single sheets are punched and emerge ready to
be finished into lay flat documents. These types of
documents are typically bound with coil, wire or plastic
comb binding and will lay flat when opened.
A wide variety of hole punch patterns are available.
The die sets are lightweight and do not require setup
adjustment time when changed. The operator can easily replace them. The attached stacker can offset stack
up to 2,500 sheets preparing each document for immediate binding.
equipped with an optional Bypass Stacker. This allows the operator to empty one stacker while the other
stacker is in use.
A Finisher Transport Module is required for in-line connectivity to the printer.
Please refer to the GBC Fusion Punch II Solutions Planning Guide for further site planning information,
system dependencies, limitations, valid configurations and device specifications.
Dimensions
Width x Depth x 54" x 32 " x 46 "
Height (1372 mm x 813 mm x 1168 mm)
34" (860mm)
Input Height
40.3" (1024mm)
Weight 620 lbs. (281 kg)
Weight - Shipping 920 lbs (471 kg)
Clearance: Operator Minimum 24 " in front of module
Clearance: Service Minimum 36 " on all sides
Electrical & Environmental
Temperature Range
Humidity Range
Heat Output
Punch & Stacker
Altitude
Sound Emission (with stacker)
Power
Punch
- Dedicated outlet
Stacker
recommended
Certification
Compliance
GBC Fusion Punch II
Minimum
41° F (40° C)
30% RH
1198 btu/hr. (115 V 60 Hz)
64.7 dBs (Idling)
115VAC, 60 Hz, 4.7A (230VAC, 50Hz, 6.8A)
115VAC, 60 Hz, 1.0A (230VAC, 50Hz, 0.25A)
US/Canadian approval by CSA. GS mark by TUV Product Services
CE for European Union requirement
The Fusion Punch II can also be
Bypass Stacker
27" x 32" x 46"
(686 x 813 x 1168 mm)
NA
520 lbs (236 kg)
720 lbs (326 kg)
Minimum 24" in front of module
Minimum 36" on all sides
GBC Fusion Punch II
104° F (50° C)
95% RH
2150 btu/hr. (230 V 50 Hz)
3280ft (1000m)
73.7dBs(Running, Punch & Stacker)
- 57 -
Offset Stacker
27" x 32 " x 46"
(686mm x 813mm x 1168mm)
NA
270 lbs (123 kg)
470 lbs (213 kg)
Minimum 24 " in front of module
Minimum 36 " on all sides
Maximum