Operations; Supplies And Component Yields - Xerox 100 User Manual

®
Xerox Nuvera 100/120/144 EA Digital Production System - Customer Expectations Document

Operations

Item
Power Up
First Copy Out
Time (FCOT)
First Print Out
Time (FPOT)
Restart Time
Billing Meters
Print Quality
Adjustments
Mixed Plex
Printing

Supplies and Component Yields

The consumable supplies listed below are engineered specifically for use in the Xerox Nuvera
100/120/144 EA Digital Production System and provide the highest and most consistent image quality,
maximum machine productivity, and uptime.
All yield estimates are based on the indicated 6% area coverage at standardized conditions using 8 ½"
x 11" / A4 Xerox 20 lb. bond (75 gsm) stock. Please note that actual yields vary greatly depending on
area coverage, paper stock, and image quality control settings. The current estimates are shown
below.
Consumables
Supply
EA Toner
BFM 100 Sheet Staple refills and drivers.
BFM 30 Sheet Staple refills and drivers
MFF 100 Sheet Staple Cartridge
MFF 100 Sheet Staple Refills
MFF 50 Sheet Staple Cartridge
MFF 50 Sheet Staple Refills
Staples Refills for MFF Booklet Maker
(1 for rear and 1 for front stapler required)
Xerox Nuvera ® 100/120/144 EA
Digital Production System
7½ minutes
8½ seconds (with one finisher and no
inserter)
9½ seconds.
5 minutes
Available via the Administration
window.
Automatic, brief pauses for registration or
xerographic process adjustments to
maintain high image quality
Switching between one-sided and two-
sided printing does cause some loss of
productivity. The extent of the loss is
directly related to the frequency of the
switch.
210,000 prints/bottle; 1 bottle per system (2
15,000 staples per supply package,
The package contains three 5000 staple refills and 3 drivers
15,000 staples per supply package,
The package contains three 5000 staple refills and 3 drivers
Comes installed in machine. Filled with 1 - 5,000 staple refill, this cartridge typically lasts the life
of machine.
5,000 staples per refill, 3 refills per carton
Required for initial 50-sheet stapler capacity order. Filled with 1 - 5,000 staple refill, this
cartridge typically lasts the life of machine.
5,000 staples per refill, 3 refills per carton.
2,000 staples per box; 16,000 per carton
(8 Boxes per carton)
If the environment does drift outside the specified range during
the systems' powered down state, some period of image
degradation can be expected at startup.
Copy job sent to the top tray; platen scan, simplex job, 8.5 x 11
LEF fed from tray 1
Printer should not cycle down as long as it receives an image
to print within 5 seconds of completing the previous sheet.
Vary by operating company / country; ask local analyst or
sales representative to explain your meter operation.
Automated reading of the billing meter is available, if Remote
Services are enabled.
When producing collated sets run 1 to N, the system already
optimizes performance. In other cases, adding a blank side to
the job can minimize impact, but the sheet is billed.
Yield Estimates
toner bottle is available as an option)
nd
- 16 -
Comment
®