Table of Contents
Advertisement
Accounting and Billing
Accounting file fields
Job ID
Container ID
Report ID
Host Job Number
Record status
8-2
•
Version 3: This version will export all entries that are new
and old and zero and non-zero values. Additionally, entries
will be exported that are not viewable on the GUI. These
entries are: Channel Idle Time, Initial JDL, Initial JDE, DJDE
Records Read, and Lines Printed.
•
Version 3.1: This version will export all entries that are new
and old and zero and non-zero values. This version is similar
and includes the same exported values as Version 3. Version
3.1 also includes the following fields:
– Interrupt Status: Options are Interrupt and Interrupted.
– Job Source: Indicates the Gateway through which the job
was submitted.
– RIP Interrupt Time: This value displays how long the job
was suspended in the ripping status if the job was
interrupted by a "Print Now" job.
•
Version 4.0: This version is similar and includes all the same
values as Version 3.1. However, it also includes the exported
value for Trapping. The number displayed will be the total
number of pages trapped within a job.
The following information will help you identify accounting fields
when viewing the accounting and billing information.
System assigned ID number. When a job is sent to be printed or
saved, it is given a Job ID that the system uses to track the jobs.
Job IDs are generated sequentially, however, the numbers can
be reset.
System assigned ID number. The Container ID always has the
same number as the Job ID.
Report ID for the job.
Host supplied job number, as extracted from the data stream.
This field will have one of the following values:
•
Complete
•
Quantities shown may be less than actual.
System Guide
Common Controller
Advertisement
Table of Contents
