AT&T MERLIN 1030 Attendant's Manual page 33

Feature Programming Chart (continued)
Feature Name
(suggested button label)
CALL COVERAGE FEATURES
Call Coverage
Cover Name
Secondary Coverage
Cover Name
OTHER FEATURES
Ring Option Override
Ring Option
Override
Message
Message
Loudspeaker Page
Lsp. Page-1
Privacy
Privacy
Do Not Disturb
Do Not Disturb
Touch-Tone Enable
Touch-Tone
Enable
Manual Signaling
Signal Name
Programming Code
Dial * 4 + the intercom number of the person you
want to cover.
Dial * 5 + the intercom number of the person you
want to back up.
Dial * 78.
Dial * 98.
Dial * 91 + one of the following:
80 for all zones
81 zone 1
82 zone 2
zone 3
83
Dial * 72.
Dial * 71.
Dial * 76.
Dial * 6 + intercom number
Notes
Requires a button with red and green lights. See
page 14.
Used to back up a person who has a Cover button
for someone's telephone. Calls automatically ring
after a delay.
Requires a button with lights. See page 31.
For 5-button voice terminals only. Requires a but-
ton with lights. See page 17.
Used only with loudspeaker paging equipment.
You can also dial a code to use this feature. A but-
ton with lights is recommended. See page 16.
Needed only if you share lines with other people.
Requires a button with lights. See page 30.
Requires a button with lights. See page 30.
See page 31.
See page 27.
33