Large Console - AT&T MERLIN 1030 Attendant's Manual

Large Console

When you are in Message Status mode, the green lights next to the Auto
Intercom buttons show message status and not line status. If the green
light beside a person's Auto Intercom button is on, the Message light is
on at that person's voice terminal.
To enter Message Status mode:
Touch Message Status.
Message Status and beside the Auto Inter-
Green lights come on beside
com buttons of people whose Message lights are on.
Touch the appropriate Shift button.
If the green light beside the person's Auto Intercom button is off:
Touch Send Message.
Touch the Auto Intercom button for that person.
A green light comes on beside the button.
When the green light is on (whether you turned it on or it was already on):
Touch Message Status again.
You are out of the Message Status mode and the lights beside Auto Intercom
buttons now tell you the line status of each voice terminal.
Keep in mind that when the green light next to Message Status is on, you
can see which voice terminals have Message lights on. When the green
light next to Message Status is off, you can determine which voice ter-
minals are busy.
IMPORTANT: The PBX message center cannot turn on the Message light
on a MERLIN system voice terminal.
18
10-20-30
Message Status
+
10 Tom
+
Send Message
40 Pat
NJ Office
Message Status