Pop3 - Xerox WORKCENTRE 7755 System Administrator Manual

POP3

Post Office Protocol, version 3 (POP3) is a protocol that allows email clients to retrieve email from
remote servers over TCP/IP on network port 110. This printer uses POP3 for the Internet Fax service.
Note: If your printer is locked, you must log in as a system administrator. For details, see
CentreWare IS on page 17.
In CentreWare IS, click Properties > Connectivity > Protocols > POP3 Setup.
1.
Select the address type. Options are IPv4 and Host Name.
2.
Type the appropriately formatted address and port number in the POP3 Server field. The default
3.
port number is 110.
4. Type the Login Name assigned to the printer that will be used to log in to the POP3 server.
5. Type then retype an alphanumeric password.
Enable to save new password.
6.
7. Under POP3 Settings, select Enable receipt of Email via POP3.
8. Type a Polling Interval value between 1 and 60 minutes. The default value is 15 minutes.
Click Apply.
9.
WorkCentre 7755/7765/7775 Multifunction Printer
System Administrator Guide
Network Configuration
Accessing
43