Service Display - GE NetworX Series Installation And Setup Manual

9. Service Display

The following message will be displayed periodically if the security system requires service.
Service Required
Type 2 for help
Control
Over Current
Control
Siren Trouble
Control
Box Tamper
Control
Phone Trouble
Control
Fail to Comm.
Control
Ground Fault
Control
Loss of Time
Control
Power Trouble
Control
Low Battery
Expansion
Aux Comm Fail
Expansion
Over-current
NX-148E LCD Code Pad Installation and Setup Manual
If you see this display, press
following fault messages will be displayed. Use the scroll keys
to browse through them. Press
A short circuit of a control panel's power supply has occurred.
Open circuit has occurred on the bell or siren circuit.
(Optional) The control panel's box tamper has been activated.
The phone line connected to the control is not operating
properly.
The control attempted to communicate a message to the
central station, but was unsuccessful.
Reserved.
Your system has lost total power and needs the clock reset.
The main power to your system is not on.
The standby battery is low.
An auxiliary reporting device has failed to communicate, i.e.
NX-580E, NX-582E, etc.
The power supply of an expansion device has short circuited.
.
One or more of the
# #
to exit the service menu.
21