Service Display - GE NX-148E User Manual

SERVICE DISPLAY

VI.
The following message will be displayed periodically if the security system requires
service. Call your service provider promptly if this message is observed.
Service Required
Type r2 for help
If you see this display, press r
will be displayed. Use the scroll keys • – to browse through them. To exit the
service messages, press [#]-[#].
Control
Box tamper
Control
Fail to Comm.
Control
Ground fault
Control
Loss of time
Control
Low Battery
Control
Over-current
Control
Phone trouble
Control
Power trouble
Control
Siren trouble
NX-148E LCD Keypad
2 One or more of the following fault messages
(Optional) The Box Tamper circuit has
activated.
The control attempted to communicate a
message to the Central Station, but was
unsuccessful.
A short to ground has been detected on a
control circuit.
Your system has lost total power and
needs the clock reset.
The standby battery is low.
A short circuit of a control's power supply
has occurred.
The phone line connected to the control is
not operating properly.
The main power to your system is not on.
Open circuit has occurred on the bell or
siren circuit.
21