Setting The Lighting; Service Menu - GE NX-1300E User Manual

Time Hour Code
12:00
Midnight
1:00 AM
2:00 AM
3:00 AM
4:00 AM
5:00 AM
6:00 AM
7:00 AM
SETTING THE KEYPAD LIGHTING
The lighting behind the keypad buttons can be increased or decreased as
desired. Press the [ ] and [ ] scroll keys to lighten or darken the
illumination behind the buttons. It is usually easier to set this adjustment in a
darkened room.
The service light will be "on" if the security system requires service. If the
service light is "on", press the [ρ] key followed by the [2] key to determine
the service condition. One or more zone lights will illuminate indicating what
service(s) is required.
problems. Below is a listing of what each light means in a service condition.
TO EXIT THE SERVICE LIGHT MODE - PRESS THE [#] KEY.
LIGHT
1 SYSTEM FAULT - Press the [1] key. The zone light(s) that is
illuminated corresponds to the system fault(s) below:
1 Over Current Fault
2 Siren Trouble
3 Box Tamper
4 Expander Power
Note: Faults 1 & 2 are global in nature and will affect all
partitions of a multi-partition system. Press the [#] key to
return to the 1 of 8 service lights.
Time
00 8:00 AM
01 9:00 AM
02 10:00 AM
03 11:00 AM
12:00
04
Noon
05 1:00 PM
06 2:00 PM
07 3:00 PM

SERVICE MENU

Call your service provider immediately for these
Hour Code
08
09
10
11
12
13
14
15
PROBLEM
5 Expander Low Battery
6 Expander Box Tamper
7 Expander Trouble
8 Ground Fault
Page 17
Time Hour Code
4:00 PM
5:00 PM
6:00 PM
7:00 PM
8:00 PM
9:00 PM
10:00 PM
11:00 PM
16
17
18
19
20
21
22
23