7i. Light Control for X-10 Devices
When used in conjunction with an X-10 output device such as the NetworX NX-507E, NX-508E, NX-534E
or NX-540E, this menu allows the user to control up to ten X-10 devices from each code pad.
Action
[device number]
to turn ON
to turn OFF
#
7j. House Codes for X-10 Devices
When used in conjunction with an X-10 output device such as the NetworX NX-507E, NX-508E, NX-534E
or NX-540E, this menu allows the installer to program the specific X-10 unit and house codes for the ten
X-10 devices for this code pad.
Action
[program code]
[X-10 unit code]
[X-10 house code]
#
7k. Change Languages
Action
NX-148E LCD Code Pad Installation and Setup Manual
Result
Prompts to 'Select Light Number 0-9'.
Displays the light number on the left.
Prompts to turn the light 'On' or 'Off' on the right.
Prompts to 'Select Light Number 0-9'.
Repeat steps 2 and 3 until all devices have been
programmed.
Exits the function.
Result
Prompts to 'Please Enter Your Code'.
Displays light number and unit code.
Prompts for the unit code of the device.
Prompts for the house code of the device.
rd
th
Repeat 3
and 4
steps until all devices have been
programmed.
Exits the function.
Result
Code pad toggles to the second language.
Code pad reverts to the first language.
15