Xerox PHASER 3635 User Manual page 148

8 Print Files
1 Print the Job(s)
2 Job Status Screen
3 Stop the Job
142
Press the Start button.
NOTE: Do not remove the USB drive from the device until printing has completed.
To follow the progress of your scanning job, press the Job Status button on the
control panel to display the Job Status screen.
The default Job Status screen displays all incomplete jobs. If there are no
incomplete jobs in progress, the message "No Active Jobs" is displayed. For more
information on the Job Status screen, refer to Job Status Screen in the Copy
chapter on page 41.
Follow the steps below to manually cancel an activated job.
1.
Press the Stop button on the control panel to cancel the current copy job.
Xerox Phaser 3635 User Guide