Send Header Text - Xerox PHASER 3635 User Manual

Store to Mailbox
Print Mailbox
Documents
Xerox Phaser 3635 User Guide
Select Off to send the fax immediately.
Select Specific Time to enter the time you wish the fax to be sent. Enter the hours
and minutes separately and select AM or PM to denote if you want the fax to be
sent in the morning or the evening.

Send Header Text

Select On to enable transmission header details on outgoing faxes. To format
Transmission Header details, refer to Transmission Header Text in the Setups
chapter on page 175.
Mailboxes
Mailboxes are areas of machine memory where incoming faxes are stored or from
which outgoing faxes can be polled (see Polling – page 75). The System
Administrator can set up to 200 mailboxes on your machine.
You can use a mailbox located on the same machine you are using (local mailbox),
or a mailbox set up on a remote machine (remote mailbox).
Local mailboxes can contain both stored or received documents. Stored
documents are placed in the local mailbox by the user standing at the device;
received documents are placed in the local mailbox by a remote fax device. The
local mailbox may be password protected and a local user can delete or print the
contents of the mailbox.
Documents held within the local mailbox are recognized as stored for polling,
printing or deleting by the user. To access a mailbox you must enter the 3 digit
mailbox number and, if applicable, a 4 digit mailbox passcode. Please contact your
System Administrator for more information.
NOTE: The storage time for faxes is set up by your System Administrator.
Allows users to scan and store fax documents for polling. Documents are stored in
your mailbox and automatically sent to a remote fax machine when requested.
1.
Enter Mailbox number (max 20 digits).
2.
Enter Mailbox passcode (4 digit code).
3.
Press Start.
Allows you to print a hard copy of the documents stored in a mailbox.
1.
Enter Mailbox number (max 20 digits).
2.
Enter Mailbox passcode (4 digit code).
3.
Press Start.
4 Fax
77