Table of Contents
Advertisement
Step 2: Install the firmware update utility
Your HP Vectra PC or IBM PC AT compatible computer must have MS-DOS 3.1
or greater and a fixed disk drive. The firmware update utility and the 64780
firmware require about 300 Kbytes of disk space.
1 Insert the 64700 SW UTIL disk into drive A.
2 Change MS-DOS prompt to drive A: by typing "A:" at the MS-DOS prompt.
For example:
C> A: <RETURN>
A>
3 Type "INSTALL" at the MS-DOS prompt.
For example:
A> INSTALL <RETURN>
After confirming that you want to continue with the installation, the install program
will give you the option of changing the default drive and/or subdirectory where
the software will reside. The defaults are:
Drive = C:
Directory Path = C:\HP64700
Follow the remaining instructions to install the firmware update utility and the
64780 firmware. These instructions include editing your CONFIG.SYS and
AUTOEXEC.BAT files. Details follow in the next steps.
4 After completing the install program, use the PC editor of your choice to edit the
\CONFIG.SYS file to include these lines:
BREAK=ON
FILES=20
BREAK=ON allows the system to check for two break conditions:
<CTRL><Break>, and <CTRL>c.
Chapter 5: Installing/Updating Emulator Firmware
Updating the firmware using a PC
103
Advertisement
Table of Contents
