Xerox Copycentre C20 User Manual page 98

Printer Problems
Table 5.1 Printer operation problems (continued)
Problem
Job does not print in the
correct colors.
Job prints in a different
color and setting than
the color-setting set in
the printer driver.
Printer prints, but no
characters appear.
5-6 DocuPrint C20/NC20 User Guide
Adjust the colors through the software application, the printer driver, or
CentreWare DP. Change the Color Correction setting in the Color Menu. See
Color Correction in Chapter 1 of the System Administrator Guide for more
information.
Software settings override printer driver overrides the Control Panel setting.
Adjust the color in the software settings by changing the Color Correction
setting in the Color Menu. See Color Correction in Chapter 1 of the System
Administrator Guide for more information.
• Make sure the tape is removed from the printhead. See
Chapter 4: Maintaining the Printer for more information.
• Check the print cartridges to be sure they are correctly installed. See
Chapter 4: Maintaining the Printer for more information.
• Check to see if the print cartridge ink is low or empty. See
Chapter 4: Maintaining the Printer for more information.
• Made sure print material is loaded in the printer.
Action
Table 5-1 Page 4 of 4