Xerox Copycentre C20 User Manual page 80

Replacing the Print Cartridges
4-10 DocuPrint C20/NC20 User Guide
12 The display reads:
RIGHT CART TYPE
New Standard
Do one of the following:
• If you installed a new standard yield print cartridge,
press OK to choose
• If you installed a previously used standard yield print
cartridge, press
the second line of the display. Press OK to choose
.
Standard
• If you installed a new high yield print cartridge, press
until New Hi Capacity
line of the display. Press OK to choose
.
Capacity
• If you installed a previously used high yield print
cartridge, press
on the second line of the display. Press OK to choose
Old Hi Capacity
13 Go to the procedure "To Align the Print Cartridges"
(page 4-11). Pressing
returns the printer to the ready state without changing
the alignment settings.
If you install a partially used print cartridge, the
low ink levels and ink percentages will not be
accurate.
.
New Standard
until appears on
Old Standard
appears on the second
New Hi
until
Old Hi Capacity
.
without installing any cartridges
Old
appears