Xerox Copycentre C20 User Manual page 39

5 Place the print material against the right side of the input
tray with the recommended print side face down and the
top edge going in first toward the back of the input tray. If
you are using preprinted letterhead, see the section "Using
Letterhead" (page 2-19) for proper page orientation.
Go to Step 8.
6
Lift and slide the envelope length guide out toward you.
7 Place the envelopes against the right side of the input tray
with the print side face down and the stamp edge going in
first and toward the back of the input tray.
Do not feed stamped envelopes into the printer.
The stamp is shown for orientation purposes only.
Do not exceed the maximum stack height indicator
by the arrow on the right side of the input bin.
Chapter 2: Loading Print Media
Loading Paper
2-7