Xerox Copycentre C20 User Manual page 115

Table 5.3 Common error messages (continued)
Message
Load Manual
Custom Type Name
size
type size
The printer requests print material to be manually fed from the manual feed
slot.
Line 2 displays one of the following items:
: A user-defined name, for custom type 1 through 3. The
Custom Type Name
name is truncated to 16 characters.
: If the requested type matches the type currently in the tray and the
size
custom type name has not been defined by you, only the paper or envelope
size displays. The name is truncated to 16 characters.
: The requested type is a type other than a custom type. The type
type size
name is truncated to 16 characters. The requested size of paper or envelope
displays. The size name is truncated to 16 characters.
When this message displays you can:
• Load the requested size or type of print material in the manual feed slot. The
printer automatically clears the message and continues printing the job.
• Press if the correct size and type print material is loaded in the manual
feed slot.
• Press OK to clear the message and print on the print material installed in the
standard input tray or the optional Tray 2.
• See "To Cancel the Current Print Job" (page 5-24).
• See "To Reset the Printer and Cancel the Print Job" (page 5-25).
Common Error Messages
Cause/Action
Table 5-3 Page 6 of 6
Chapter 5: Troubleshooting 5-23