Entering And Exiting Tools Mode; Entering Tools Mode - Xerox 50 System Administration Manual

Entering and Exiting Tools Mode

Entering Tools Mode

KEY POINT:
•
All previous programming selections are
canceled when you press the Clear All button
in the Tools Mode.
•
You cannot program jobs while in the Tools
Mode.
1
Press the Administration button (Figure 2) above
the numeric keypad to display the Access screen,
illustrated in Figure 3.
2
Touch the Tools button to display the Tools
Access Number screen, as illustrated in Figure 4.
DOCUMENT CENTRE CS 50 SYSTEM ADMINISTRATION GUIDE 3–3
Figure 2: Administration symbol
Figure 3: Access screen
Figure 4: Tools Access Number screen
1
2
3
4
5
6
7
TOOLS MODE