Xerox 50 System Administration Manual page 119

12
Rotate the Paper Path Module Handle
counterclockwise, to the up position, until it locks
into position.
13
Close the Front Door of the copier/printer.
14 Remove the sheets of paper on the floor under the
Paper Path Module and dispose of the sheets
according to local regulations.
CAUTION:Fuser oil can be slippery. If any fuser
oil has been spilled on the floor, thoroughly clean
the area.
WARNING: Do not place the fuser oil cartridge on
the copier/printer. If any fuser oil is spilled on the
copier/printer, thoroughly clean the copier/printer.
WARNING: Fuser oil may cause irritation to your
eyes. Thoroughly wash your hands with soap and
water after handling the fuser oil cartridge.
DOCUMENT CENTRE CS 50 SYSTEM ADMINISTRATION GUIDE 4–19
1
2
4
4
5
6
7
MAINTENANCE