Auditron Access Levels - Xerox 50 System Administration Manual

Auditron access levels

There are two levels of access to the Auditron:
Administrator access level and user access level.
Administrator access level
The Auditron Administrator creates and modifies
user accounts and monitors copying status for
billing purposes.
As the Auditron Administrator, you will change the
default Auditron Administration password to your
own personal password. This allows you, and
only you, to have access to this level; however, it
is wise to have another person as a backup.
In the administrator access level, you will enable
the Auditron for usage, assign user account
numbers and passwords, set specific parameters
for each user account (such as copy output limit),
modify user account information when necessary,
and collect and record account data.
You access the Auditron Administrator level by
pressing the Administration button on the control
panel and touching the Auditron Administration
button on the Access screen, as shown in
Figure 10.
User access level
This level is used for making copies. When the
Auditron is enabled and user accounts are set up,
users must enter their specific user account
numbers prior to making copies.
DOCUMENT CENTRE CS 50 SYSTEM ADMINISTRATION GUIDE 2–7
Figure 10: Auditron Administration button
METERS, CONSUMABLES, AND AUDITRON
1
2
2
4
5
6
7