Touch Pilot User Interface; General Description; Buttons - Carrier Touch Pilot Manual

4 - TOUCH PILOT USER INTERFACE

4.1 - General description

Touch Pilot includes the 5 in. touch screen allowing for easy
system control. It is recommended to use a pen for the
navigation.via.the.touch.screen..
Navigation.through.the.Touch.Pilot.control.is.either.using.
the touch screen interface or by connecting to the web
interface..The. navigation. menus. are. the. same. for. both.
connection methods. Only two web connections are
authorised at the same time.
Touch Pilot provides access to the following screens:
• Welcome screen (splash screen)
• Synoptic screen
• Operating mode selection screen
• Data/configuration.screens
• Password entry and language selection screen
• Alarms screen
• Parameter.modification.screen
• Time schedule screen
• Trendings

4.2 - Buttons

Home button
Home screen displayed
Login button
Basic access
User access
Login screen
Login: Confirm advanced access login
Logout: Reset the user level access
and go to the splash screen
Force screen (override)
Set force: Override the current command
(if possible)
Remove force: Remove the forced command
8
IMPORTANT:
If the user interface is not used for a long period, the Welcome
screen is displayed, and then it goes blank.
The control is always active and the operating mode remains
unchanged. Press anywhere on the screen and the Welcome
screen will be displayed.
HOME SCREEN
Main Menu button
Main Menu displayed
Start/Stop button
Unit is stopped
Unit is running
(green icon)
OTHER SCREENS
Parameters screen(s)
Navigation buttons
Back button
Go back to the previous screen
Alarm button
No alarm active on the unit
Blinking icon: Partial alarm (one
circuit affected by the alarm) or Alert
(no action taken on the unit),
Steady icon: Alarm(s) active on the
unit (see also section 8.6)
Save changes
Cancel your modifications
Displayed when the menu includes more than one page:
Go to the previous page
Displayed when the menu includes more than one page:
Go to the next page